.news-list-date { display: none; } Updated 05/14/2025 Published 07/16/2020Today we want to talk about the components of our two metering units AirVac and AirSpeed that are responsible for a perfect singulation of the grains. Mechanisms to control the grain uptake in the metering unit Let’s start with the grain uptake: The grain feed slide controls how many grains get into the metering unit und thus, the supply of grains at the metering disc. The slide can also be used to separate the metering unit completely from the seed supply so that the seed box does not have to be emptied if for example the metering disc is changed. Moreover, the position of the feed slide influences the grain uptake behaviour and, thus, the singulation result. In general: For larger seeds like maize or beans, the slide can be opened a little bit more, for smaller seeds like sugar beet or rape, the slide can be closed a little bit further. The less seed is in the metering unit, the more precise is the grain uptake as the grain that is taken up at the metering disc hole does not have to be “pushed” through a large quantity of grains in the supply area. You have, of course, to make sure that there always is enough seed in the metering unit. So-called agitator pockets are integrated in the metering discs. They constantly mix the seed depot and see to it that the grains in the supply area always move and cannot get stuck. Thus, you can prevent gaps already at the time of the grain uptake. Process and control of the grain release in the metering system: AirVac vs. AirSpeed After the grain uptake, possible double spots are eliminated by the universal singulator. As soon as the grains have been taken up, a total of five singulation fingers slightly reach into the row from above and from below and remove redundant grains and double spots. The singulator has been designed in such a way that it no longer has to be adjusted to the metering disc thus facilitating the operation of the whole system enormously. The grains are then transported to the grain outlet of the metering units. The grains are ejected via the end section of the vacuum resp. overpressure area – to be specific via the seal that is integrated in the cover of the metering unit. The grains do no longer adhere to the holes of the metering disc and, with the AirVac system, fall directly to the ground through the fall tube. After that they are caught by the catching roller so that the grains cannot roll away and are embedded. With the shoot system AirSpeed, the grains are caught by another air current immediately after the overpressure area has been sealed. They are shot into the seed furrow with high speed through the shoot pipe, are caught by the catching roller and embedded. Due to this active, controlled transport, an excellent longitudinal distribution of the grains is achieved even at operational speeds of up to 15 km/h.Technical highlights: sensor system, monitoring and cleaning wheel At the shoot pipe resp. the fall tube, the singulation accuracy in both systems is monitored by an optical grain counting sensor. The sensor can detect gaps as well as double spots. Moreover, it can identify the distance between the grains and, based on this information, calculates the variation coefficient which is an indicator for the accuracy of the longitudinal distribution. It also records the number of sown grains and calculates the deviation from the target quantity and the actual quantity. The driver can see this information clearly on the terminal as an average value for the whole machine. It is also possible to have the determined values of an individual row displayed. If the tank is empty and no grains are sown, an optical and acoustic “Zero-grains-alarm“ is immediately displayed at the terminal. After the grain outlet, the last component used is an ejection wheel in the cover of the metering unit. The star-shaped wheel pierces all holes of the metering disc and, if necessary, removes any broken grains that got jammed or cleans away any other dirt. This ensures that all holes are clean and free, that grains can be taken up and gaps are prevented. Terminal-based setting of crop, sowing density and tramlines The metering units are driven by electric motors. The sowing density can be adjusted comfortably via the terminal. Changing to another type of crop also requires only little manual intervention. In addition to the adaption of the metering disc and, if necessary, of the cleaning wheel, you only have to enter the correct type of crop at the terminal. Thus, the parameters of the grain monitoring are customised to the respective crop. Thus, functions like SectionControl and VariableRate are available as standard. The machine only has to be operated via a terminal where these functions are activated. When using VariableRate, the function „VariableRate Row-by-Row“ is also available as standard for all machines. You can sow differentiatedly according to the individual row and therefore use an application map with a resolution that corresponds to the row spacing. With the Maestro, you can also operate irrigation lanes or freely configurable tramlines. By request, the sowing density in the neighbour rows of the lane is automatically increased by percentage.This is what our customers say about the metering systems AirSpeed and AirVac
