Enough clearance between the two disc rows
Mounting in pairs increases the clearance
Large and robust bearing – shaft diameter of 35 mm with maintenance-free oil-bath bearing
Large rubber suspension ensures good contour-following qualities, stable disc angle and low wear and tear
Spade discs at the outer end ensure
level conditions between passes
Easy setting of working depth with AluClip spacers
| HORSCH Joker | 5 HD | 6 HD | 8 HD |
| Working width (m) | 5.00 | 6.00 | 7.00 |
| Transport width (m) | 3.00 | 3.00 | 3.00 |
| Transport height (m) | 3.30 | 3.70 | 4.00 |
| Length (m) | 7.10 | 7.10 | 7.10 |
| Weight (kg)* | 7 050 | 7 660 | 8 370 |
| Tyre size support wheels | 400 / 60 – 15.5 | 400 / 60 – 15.5 | 400 / 60 – 15.5 |
| Tyre size chassis | 385 / 65 – 22.5 | 385 / 65 – 22.5 | 385 / 65 – 22.5 |
| DiscSystem-diameter Ø (cm) | 62 | 62 | 62 |
| DiscSystem disc size (mm) | 6 | 6 | 6 |
| Number of DiscSystem discs | 42 | 50 | 58 |
| Disc angle (degree) | 17 | 17 | 17 |
| DA control devices | 4 | 4 | 4 |
| Horsepower requirement (kW/hp) | 130 – 170 / 180 – 230 | 160 – 180 / 220 – 250 | 220 – 260 / 300 – 350 |
| Lower link linkage | Cat. III – III / IV – IV | Cat. III – III / IV – IV | Cat. III – III / IV – IV |
| Adj. drawbar linkage | Hitch Ø 42 – 51 mm | Hitch Ø 42 – 51 mm | Hitch Ø 42 – 51 – 71 mm |
* Weights of the machines with minimum equipment
| Seed bar for | 5 HD | 6 HD | 8 HD |
| Working width (m) | 5.00 | 6.00 | 7.00 |
| Number of seed tubes Double RollPack packer | 26 | 30 | 34 |
| Seed tube spacing Double RollPack packer (cm) | 20.00 | 20.00 | 20.60 |
| Diameter main line (mm) | 1x110 | 1x110 | 1x110 |