Leeb LT

Engineering for professionals

The basis

  • Solidly designed frame made of quality steel
  • Optional: air-suspended axle with level compensation
  • Solid drawbar connection for large clearance, top or bottom connection, depending on the vertical load

Steering axle – less tramline damage (optional)

  • Steering axle for stable positioning of the boom with high stability and exact tracking to avoid tramline damage
  • Optimal, even in uneven terrain
  • Large steering angle due to a taper-cut frame design

Large tyres – less ground pressure

  • Wheels with diameter of up to 2.05 m
  • Maximum ground contact area with perfectly adapted air pressure
  • Adapted Tyre Pressure Control – automatic tyre pressure regulation that is completely integrated in the software

Extremely low centre of gravity

  • Tank shape is optimised with regard to the surging force

Taking care of the crop

  • Smooth machine underbody
  • No edges and corners on the underside of the machine
  • Hydraulically foldable and fully covered support leg

Modern plastic tank

  • Conical geometries for low surge forces
  • 500 litre fresh water tank: enough water for a complete inside cleaning as only very little residual quantities remain in the system.
  • Large radii, absolutely smooth surfaces and no back tapers for easy cleaning.
  • Deep sump area for complete discharge and minimum residual quantities even on slopes.

 

Three equipment versions

Eco

  • Manual operation for the suction and pressure side
  • Piston diaphragm pump (400 l/min) driven by pto-shaft
  • Hydraulic agitator

CCS

  • Manual operation for the suction and pressure side
  • Additional piston diaphragm pump for the continuous inside cleaning system CCS
  • Continuous inside cleaning can be operated in the cabin
  • Oil-driven (Load Sensing) centrifugal pump (600 l/min)
  • Hydraulic agitator

CCS Pro

  • Electronic operation on pressure and suction side for complete control from the cabin
  • Additional piston diaphragm pump for the continuous inside cleaning system CCS with automatic washing programs, e. g. intensive washing program, boom rinsing
  • Centrifugal pump driven via oil (Load Sensing) (600 l/min)
  • External control terminal
  • Hydraulic agitator, is controlled electronically via terminal and external control unit. Automatic switch-off if the residual quantity in the mixture tank falls below 150 liter.

Theodor Leeb

“When we developed the Leeb LT, the focus was on highest precison in plant protection combined with utmost efficiency.“

Leeb LT details

  • Tank capacity: 4 000, 5 000 and 6 000 litre
  • Top or bottom linkage selectable
  • Low gravity centre of the spraying tank
  • Tank made of polyethylene (PE)
  • Optimised tank shape for transport and cleaning
  • Optimised hose laying reduces hose lengths to a minimum
  • Boom suspension is designed as a parallelogram – hydr. spring-loaded and damped.
  • Soft and smooth boom rest even in hilly terrain and at high operational speeds.
  • The geometry of the parallelogram has been designed in such a way that the boom is kept close to the axle. The suspension is extremely torsion-resistant and thus perfectly suitable for the automatic boom controlsystem Leeb BoomControl.
  • Nozzle protection against mechanical damage of the nozzles and wind protection during the development of the spraying fan

Due to the waisted frame design a steering angle of up to 28° is possible even with large tyres

Strong, convincing arguments

  • Less drift and high working speeds due to automatic BoomControl due to low target area distance
  • High working speeds due to hydro-pneumatic boom damping
  • Complete circulation in stainless steel circulatoin tubes to the nozzle
  • Continuous ground clearance
  • Crop protecting, smooth underfloor design
  • Large tyres up to ø 2.05 m possible
  • Gravity-optimised and waisted frame design for large steering angles
  • Novel operating concept
  • Central arrangement of control units
  • Pumping capacity up to 600 l/min
  • Efficient induction hopper made of PE
  • Compact external dimensions in transport position
  • No parts protruding towards the tractor
  • Continuous inside cleaning (CCS and CCS Pro)
  • Spring-loaded axle
  • Integrated overload protection in the boom

Boom does not reach to the front towards the tractor cabin

Boom middle section for working width ranging from 18 to 30 metre, optionally available with pivoted frame.

Three suspension versions are available: non-suspended, elastomer buffer and pneumatic suspension

Large clearance, high comfort and a smooth underbody.

Option

  • Fully integrated axle steering (when reversing automatic centring of the steering axle)
  • Induction hopper made of stainless steel
  • NightLight: powerful LED spraying cone lighting with washing device
  • Pre-field lighting: 2 LED headlights
  • Lighting in the working range of the induction hopper
  • SectionControl (automatic section control)
  • Pneumatic spring-loaded axle
  • Hose drum or high-pressure cleaner for outside cleaning
  • BoomControl expansion with 2 sensors
  • Camera system for the area behind the machine
  • Spacious container deposit facility below the right side cover
  • Individual section layout according to the customer’s requirements
  • Second pressure filter in the rear of the parallelogram ATP Control for automatic regulation of the tyre pressure
  • AutoSelect, automatic switching between the nozzle levels
  • Connect & Fold system to integrate underleaf spraying systems
HORSCH Leeb LT Light 4 LT Light 5 LT Light
Measures and weights  
Unladen weight (kg) 4 150 – 5 0504 150 – 5 050
Tongue load empty (kg) 450 – 750450 – 750
Max. permissible vertical load (kg) 2 5002 500
Axle load empty (kg) 3 700 – 4 3003 700 – 4 300
Max. permissible axle load (kg) 8 2508 250
Overall length max. (transport position) (m) 7.707.70
Transport width (transport position) (m) 2.552.55
Transport height (m) 3.40 – 3.603.40 – 3.60
Track widths (m) 1.80 / 2.00 / 2.251.80 / 2.00 / 2.25
Ground clearance axle (m) 0.750.75
Tank  
Mixture tank nominal capacity (l) 4 0005 000
Mixture tank actual capacity (l) 4 4005 300
Fresh water tank (l) 500500
Hand wash tank (l) 1515
Spraying boom  
Working widths 18 / 12 5 sect.18 / 12 5 sect.
 21 / 12 5 sect.21 / 12 5 sect.
 24 / 12 5 sect.24 / 12 5 sect.
 27 / 21 / 12 7 sect.27 / 21 / 12 7 sect.
 28 / 21 / 12 7 sect.28 / 21 / 12 7 sect.
 30 / 21 / 12 7 sect.30 / 21 / 12 7 sect.
Sections, min. / max. (pieces) 6 – 426 – 42
Working height (m) 0.3 – 2.5*0.3 – 2.5*
Pump output CCS and CCS Pro (l/min) 600600
Max. discharge at the boom (l/min) 350**350**
Pump output (l/min) 400400
Max. discharge at the boom (l/min) 320**320**
Working pressure, max. (bar) 88
Working speed (km/h) 4 – 204 – 20

* Working height depends on the height of the coupling point of the tractor and the tyres
** The indicated application rates apply to water with a spraying pressure of approx. 5 bar. With other pressures the application rates may differ upward and downward.

HORSCH Leeb LT 4 LT 5 LT 6 LT
Measures and weights   
Unladen weight (kg) 4 250 – 6 4004 250 – 6 4004 250 – 6 400
Tongue load empty (kg) 450 – 800450 – 800450 – 800
Max. permissible vertical load (kg) 3 0003 0003 000
Axle load empty (kg) 3 800 – 5 6003 800 – 5 6003 800 – 5 600
Max. permissible axle load (kg) 10 00010 00010 000
Overall length max. (transport position) (m) 7.707.707.70
Transport width (transport position) (m) 2.552.552.55
Transport height (m) 3.40 – 3.603.40 – 3.603.40 – 3.60
Track widths (m) 1.80 / 2.00 / 2.251.80 / 2.00 / 2.252.00 / 2.25
Ground clearance axle (m) 0.850.850.85
Tank   
Mixture tank nominal capacity (l) 4 0005 0006 000
Mixture tank actual capacity (l) 4 4005 3006 400
Fresh water tank (l) 500500500
Hand wash tank (l) 151515
Spraying boom   
Working widths 18 / 12 5 sect.18 / 12 5 sect.18 / 12 5 sect.
 21 / 12 5 sect.21 / 12 5 sect.21 / 12 5 sect.
 24 / 12 5 sect.24 / 12 5 sect.24 / 12 5 sect.
 27 / 21 / 12 7 sect.27 / 21 / 12 7 sect.27 / 21 / 12 7 sect.
 28 / 21 / 12 7 sect.28 / 21 / 12 7 sect.28 / 21 / 12 7 sect.
 30 / 21 / 12 7 sect.30 / 21 / 12 7 sect.30 / 21 / 12 7 sect.
 30 / 24 / (12) 7 sect.30 / 24 / (12) 7 sect.30 / 21 / (12) 7 sect.
 32 / 24 / (12) 7 sect.32 / 24 / (12) 7 sect.32 / 24 / (12) 7 sect.
 33 / 24 / (12) 7 sect.33 / 24 / (12) 7 sect.33 / 24 / (12) 7 sect.
 36 / 24 / (12) 7 sect.36 / 24 / (12) 7 sect.36 / 24 / (12) 7 sect.
 38 / 27 / (14) 7 sect.38 / 27 / (14) 7 sect.38 / 27 / (14) 7 sect.
 39 / 27 / (14) 7 sect.39 / 27 / (14) 7 sect.39 / 27 / (14) 7 sect.
 40 / 27 / (14) 7 sect.40 / 27 / (14) 7 sect.40 / 27 / (14) 7 sect.
 40 / 28 / (14) 7 sect.40 / 28 / (14) 7 sect.40 / 28 / (14) 7 sect.
 42 / 28 / (14) 7 sect.42 / 28 / (14) 7 sect.42 / 28 / (14) 7 sect.
 44 / 30 / (14) 7 sect.44 / 30 / (14) 7 sect.44 / 30 / (14) 7 sect.
 45 / 30 / (14) 7 sect.45 / 30 / (14) 7 sect.45 / 30 / (14) 7 sect.
Sections, min. / max. (pieces) 6 – 426 – 426 – 42
Working height (m) 0.3 – 2.5*0.3 – 2.5*0.3 – 2.5*
Pump output CCS and CCS Pro (l/min) 600600600
Max. discharge at the boom for CCS and CCS Pro (l/min) 350**350**350**
Pump output Basic (l/min) 400400400
Max. discharge at the boom for Basic (l/min) 300**300**300**
Working pressure, max. (bar) 888
Working speed (km/h) 4 – 204 – 204 – 20

* Working height depends on the height of the coupling point of the tractor and the tyres
** The indicated application rates apply to water with a spraying pressure of approx. 5 bar. With other pressures the application rates may differ upward and downward.

Indications may vary depending on the equipment.

Our standard

Our standard

Equipment lines

Equipment lines

Intelligence

Intelligence

HorschConnect

HorschConnect

Intelligent application technology

Intelligent application technology

PrecisionSpray

PrecisionSpray

The Leeb boom

The Leeb boom

Automatic boomcontrol

Automatic boomcontrol

ATP Control

ATP Control

LED lighting

LED lighting
Más en el centro de descarga