The cultivator Cruiser SL is the new specialist for shallow tillage with 3-point linkage. It is available in 4, 5 and 6 metre working width. With a maximum working depth of 15 cm it is ideal for perfect stubble cultivation with optimum straw distribution after combine harvesting, for seedbed preparation, as a fine cultivator for mechanical weed control and for loosening and venting the soils in spring.
Due to its 4-bar design the levelling effect of the Cruiser is excellent. Due to the special design of the tine above the frame the clearance amounts to 70 cm, thus increasing the clearance in the fine cultivator sector considerably. The close tine spacing of 16 cm guarantees an optimum mixing ratio and a perfect crumbling on the surface.
The new RingFlex packer is another upgrade for out Cruiser SL . Due to its 7-cm-wide rings the contact area is larger. Thus, it allows for an exact depth control even in lighter soils. Moreover, it produces a high amount of fine soil which is optimum for the emergence of the following crop.
RollFlex packer
HORSCH spring tine in the new Cruiser SL
Hydraulic depth adjustment with display
Optional: disc levelling or tine levellers
HORSCH Cruiser SL | 4 SL | 5 SL | 6 SL |
Working width (m) | 4.00 | 4.96 | 5.92 |
Transport width (m) | 2.94 | 2.94 | 2.94 |
Transport height (m) | 2.30 | 2.70 | 3.20 |
Length (m) | 4.30 | 4.30 | 4.30 |
Weight (kg)* | 2 200 – 2 700 | 2 500 – 3 300 | 3 000 – 3 600 |
Number of tines | 25 | 31 | 37 |
Tine spacing in one row (cm) | 64 | 64 | 64 |
Tine spacing (cm) | 16 | 16 | 16 |
Maximum working width (cm) | 15 | 15 | 15 |
Actual clearance (mm) | 700 | 700 | 700 |
DA control devices | 1 (+1 hydr. depth adjustment) | 1 (+1 hydr. depth adjustment) | 1 (+1 hydr. depth adjustment) |
Horsepower requirement (kW/hp) | 90 – 120 / 140 – 190 | 110 – 150 / 170 – 230 | 130 – 180 / 200 – 270 |
Tool attachment | 3-point Cat. III | 3-point Cat. III | 3-point Cat. III |
* Weight of the machines with minimum / maximum equipment
To meet the requirement of flexible use for a tillage tool, new technologies and developments in this sector are essential. A tool for stubble cultivation needs a powerful tine that distributes harvest residues in an optimum way and guarantees good mixing. For seedbed preparation in the spring the farmer expects the highest precision with regard to levelling and at the same time high stability to break the topsoil from the winter furrow. HORSCH combines all these characteristics in a new generation of tines.
With a release force of 150 kg and a trip release height of 20 cm the HORSCH spring tine constantly maintains the promised work-ing depth of up to 15 cm even in the most difficult conditions. Due to the novel design of the spring tine the clearance of the Cruiser SL is increased from 600 mm to 700 mm. This allows for working without blocking even if there are high quantities of organic residues.
The special geometry of the suspension of the new HORSCH spring tine allows for an easy upward release without a lot of movement in the spring. This novel technology eases the stress on the material and increases the service life considerably.
To achieve the best work result, HORSCH offers the appropriate point version for the new HORSCH spring tine for any use – from a 5 cm wide chisel point for seedbed preparation to a carbide duck foot point for an all-over cutting during stubble cultivation.
HORSCH spring tine
High clearance
HORSCH spring tine
Due to the many point versions the HORSCH Cruiser can be used almost the whole year – for a ventilation of the soil in spring, for seedbed preparation for maize, for stubble breaking in summer and for seedbed preparation in autumn. The point angle allows for an ultra-shallow and all-over cutting at a low working depth. All point versions are available with the wellproven HORSCH carbide-tipping (HM) for a long service life.
5 cm HM point 5 cm wide HM point: ideal for seedbed preparation and for the ventilation of the soil in spring – up to 15 cm working depth
8 cm HM point 8 cm wide HM point: ideal for stubble breaking, straw distribution and mixing, can also be used for seedbed-preparation – up to 10 cm working depth.
10 cm HM point 10 cm wide HM point: ideal for stubble and seedbed preparation on very light soils, perfect straw distribution and mixing of organic matter – max. working depth up to 10 cm.
Carbide duck foot point Ideal for shallow mechanical weed control, all-over cutting – as of 2 cm working depth.
5 cm HM point
8 cm HM point
10 cm HM point
Carbide duck foot point
Carbide duck foot point
HORSCH offers the appropriate packer version for deep as well as for shallow consolidation. The choice of the packer always depends on the soil and HORSCH has a suitable solution for any type of soil. Consolidation compacts excessively loose soil, crushes clods and creates optimum surroundings with an optimum ratio of water-bearing and air-bearing pores.
RollFlex packer, Cage drum roller, DoubleCage packer and RingFlex packer
Depth adjustment disc levelling
Cage drum roller
Hydraulic depth adjustment with display
HORSCH spring tine (150 kg release force)
8 adjustable edge discs Cruiser SL
Optional harrow behind the packer
Leveller levelling
LED rear lights
Storage area for hydraulic couplings