Leeb CS

• Safe and quick cleaning by displacing the mixture from the lines
• Quick cleaning process of the sprayer without having to get off
• Complete control of the cleaning process in the cabin
• Electronic level indicator at the mixture tank with automatic switch-off
• Quick and thorough cleaning with optimised water use

The CCS water system guarantees a continuous inside cleaning of tank, lines and boom. The additional CCS piston diaphragm pump for cleaning pumps clean water into the spray lines, the spraying pump removes the residual mixture from nozzles and the spray lines instead of diluting it. This allows the system to be cleaned quickly, thoroughly and with an optimised water consumption – without having to get off the machine directly from the cabin – and the sprayer is completely cleaned when leaving the field. To fill the machine, a powerful rotary pump with Load Sensing is used with manual operation for the suction and pressure side.

• The precise, lowest possible working height is maintained due to automatic boom control system
• Boom control system with a target height below 40 cm ensures minimum drift
• Active adaption of the boom to the terrain due to two sensors

Automatic boom control system to maintain an exact, lowest possible working height even at high operational speeds in flat or slightly hilly terrain. The safe and stable boom control system with a target height of under 40 cm ensures minimum drift. The boom adapts to the terrain via two ultrasonic sensors and is completely decoupled from the machine. No compromise between damped and freely suspended boom.

• Independent angling of the boom section and the middle section to follow the terrain
• Active adaption of the boom to the terrain due to 4 sensors
• The precise, lowest possible working height is maintained due to automatic boom control system
• Boom control system with a target height below 40 cm ensures minimum drift
• Boom is completely independent from the machine

With four ultrasonic sensors BoomContro Pro can angle the boom as well as the middle section to better adapt the boom control system to uneven and slightly hilly terrain. Thus, even at high operational speeds, this version of the automatic boom control system can accurately maintain the lowest possible working height. The safe and stable boom control system with a target height of under 40 cm ensures minimum drift. Active adaption of the boom that is completely independent from the machine via the height control of the middle section.

• Control of the nozzle size in combination with the application rate means the operational speed is adapted
• Possibility to adjust the target height in addition to the pressure range to keep up the distance required
• Optimum distance stipulation control along waters and structures
• Automatic adaption of the boom height depending on the defined nozzle profiles
• Can be switched on or off comfortably in the cabin

Various combination options with up to 16 different nozzle profiles can be saved – each profile can be switched on or off in the cabin. If the work is not interrupted, the optimum pressure range can be adjusted in the terminal and the corresponding nozzle size are controlled automatically continuously. Automatic adaption of the boom height depending on the chosen nozzle profiles and automatic switching between the nozzle levels. The nozzle spacings stored in the nozzle profiles serve as a basis. With more nozzles the farmer has more options to choose from.

Fully automatic AutoSelect control: Control of nozzle size or combination while at the same time adjusting the application rate and the operational speed. High comfort and safety for an optimum management of the distance along waters and structures.

• Digital solutions exactly where they make sense
• Straightforward out-of-the-box solution with integrated SIM card, WLAN modem and other interfaces
• HorschConnect Telematics: automated documentation of application quantity, nozzle profile, nozzle status, pressure and target area spacing
• Targeted and proactive service due to remote access of the error messages
• Control of machine functions via smartphone app MobileControl: e.g. the nozzle test is carried out for individual sections.

Prepare today for tomorrow. Control different machine functions quite easily via the MobileControl app – your smartphone replaces the terminal! In addition, gain complete, transparent insight in all aspects of work performance and working quality with HorschConnect Telematics.

• Capacity of 52 l
• Additional shock nozzle for intensive use of powder compounds
• Powerful injector filling
• Made of stainless steel and easy to clean

The swivelling induction hopper with a gas spring and a capacity of 52 l is made of stainless steel and is particularly easy to clean. The injector filling with upper and lower rinsing nozzles ensures a whirl-like circulation and is ideal for liquids as well as for granulate material. Moreover, the induction hopper is equipped with an additional shock nozzle, a stainless steel lid as well as a symbol bar with coloured control levers.

• Innovative LED technology ensures optimum illumination
• Highly focused light penetrates all spraying cones
• Optimum spraying control at twilight and at night
• 100 % control of the nozzle function – also for section control
• More safety and efficiency while spraying around the clock
• Optional: NightLight with cleaning
• Optional: Lighting strip at the induction centre and boom apron lighting

Innovative and powerful LED headlights ensure an optimum illumination with their heavily focused light which penetrates all spraying cones. Thus, the lighting system guarantees more safety and efficiency while spraying around the clock. A strong LED spotlight is installed per boom side to ensure optimum spraying control at twilight and at night as well as an overview of the nozzle function – also in section mode. The automatic light function switches off the headlights on the headlands to avoid blinding e.g., passers-by.

Optionally, NightLight can be combined with an automatic washing system that automatically cleans the lights and prevents dust from settling on the lights. Moreover, LED light strip at the induction centre as well as a LED apron lighting are available.

• Cloggings and cleaning work are reduced to a minimum
• No nozzle filters required
• Smaller nozzle calibres and double flat jet nozzles can also be used with micro-mesh filter inserts
• Doubling of the filter area

The additional pressure filter in the middle frame doubles the filter area available in front of the boom and no nozzle filters are required. Moreover, smaller nozzle sizes and double flat jet nozzles can be used with micro-mesh filter inserts. Sprayers that are equipped with the second pressure filter require less maintenance. Cloggings and cleaning work are reduced to a minimum.